Complete Flat Towing Packages

This towbar is awesome. It was easy to set up. I used it to tow my 94 Jeep Wrangler over 3,000 miles behind a class A RV. It was completely problem free and easy to use the whole way. I love the simple brake cable that relies on simple physics to make the tow vehicle brakes engage when the RV brakes engage. It worked great through steep mountain passes!

Purchased this from a recommendation on YouTube. Did my research of every system out there and settled on NSA RV as they are American made and a local builder. The people on the phone were fantastic and super helpful Make sure you ask if there are any additional parts needed for your set up. I had this installed on a 2025 Ram 1500 and pulled behind a Newmar Dutchstar. My last trip I was halfway home when I found out my battery was dead and my breaks were completely fried. The cause of this was, that when the system was installed by LEONARD TRUCK OUTFITTERS, they did not completely follow the instructions properly. After speaking with the owner ofLEONARD TRUCK OUTFITTERS, he said it was not his fault and would not accept any responsibility. I spoke with Todd - Owner of NSA RV, and he agreed that it is a 100% install issue. With that, Todd helped me with half of my brake bill. He is truly a stand up guy. He also spoke to the installer to let him know the problem is on there side and should also take care of there side. LEONARD TRUCK OUTFITTERS said it is not at all their problem. DO NOT USE LEONARD TRUCK OUTFITTERS FOR ANYTHING. Make sure you purchase from NSA RV as they stand behind there products better than any other company I have dealt with. I would fully endorse Todd and his company and, if I ever need to purchase this again, I will not go any where else for any amount of money.

Product quality is excellent, and apparent immediately upon opening the box. Also, I chose to work directly with the company, and they were great. I had a unique situation where I couldn't use the company mount on my Jeep (due to having a plow mount already), so I provided dimensions for my Jeep's D-rings (see attached picture) and the company made a custom fit mount. If I recall correctly, I don't think there was even an extra cost for customizing the mount. I didn't really have any problems, but I know the company would have been super supportive if I had needed anything. The connection system is very well designed, and easy to align. My sixteen year old son typically does the connection both ways 100% himself. After it is connected, there is a connection for the lighting, one to activate the brakes, and one as a safety that will lock the tow vehicle's brake if it someone got loose. Last year was the first towing our Jeep Unlimited. We towed from CT to the rockies, spent two months cruising around the Rocky Mountains, and then towed back from UT to CT again. We've been doing these trips for five years now, but this is the first time we towed a vehicle -- it was a massive improvement for the trip. I definitely recommend based on quality, connection design, and company support.

I had mine coming on ten years and as you described simple, effective, & safe yet cost effective. No external power, vacuum or air pressure required for normal operation. Just connect the cable from the bar to the toad and your brake ready to head out. And don't for get to buy a break away kit.